|
|
|
|
|
|
|
Induction |
|
Air Intake
|
|
Modified air intakes, fitted pleated filters behind headlights, 3" inlet pipes from filters into 3" elbow onto intake manifold, now the engine is receiving a high volume of good cold air instead of the preheated air off the radiator. |
|
|
Modified air intake throttle bodies, machined bore out from 63mm to 70mm, added larger dia butterflies from XJ40. |
|
|
Fuel Rails
|
|||||||
| Available from Ed Ward ed_ward@iprimus.com.au |
 |
||||||
|
|
|
|
|
|
|
|
|
|
With
the possibility of fire from a leaking fuel hose, it was time to eliminate the risk and change to fuel rails.
Ed Ward in Melbourne has done a great job fabricating the fuel rails with all necessary fittings,
saves a lot of work and machining.
You can use XJ40 injectors, or Falcon EL injectors (reasonably priced from wreckers) |
|||||||
| To obtain a better spray pattern from the injectors, I fitted new injectors that had been modified by Alex Blackson my Wolf Computer man to a 4 hole spray pattern, producing a much finer mist with greater spread |
|
Pressure Regulator
|
|
Fitted an adjustable pressure regulator and gauge to enable setting increased pressure of 44psi. |
